The 2003 Ford Escape's brake Light is stored inside taillight case in the back with the vehicle. This case likewise holds the backup lamp and the rear turn indicate bulb. Ford doesn't specify a replacement interval for this Escape's brake lights—you'll simply have to replace the bulbs while they burn out. It's a wise idea to check the operation of your exterior bulbs the moment a month. inch
- Mechanix Wear M - Pact Gloves
- 29 in 1 Magnetic Slotted Philips Torx Screwdriver Set
- Sylvania 3157A/4157A ST BP SilverStar 27-Watt High Performance Signal Light
Turn the headlight manage to "Off" and shut the engine down. Wear gloves to avoid in contact the replacement lamp directly.
Open this cargo door.
Find and eliminate the two Phillips screws for the taillight case which has a screwdriver. They are for the inboard side with the case and just visible when this cargo door will be open. "
Grasp the case and pull it straight to remove it. Don't tilt or swing it. Locate the braking system light bulb—it's the second bulb from the most notable. "
Turn the trunk of the brake bulb socket counterclockwise and remove it. Gently grasp this old bulb and pull it outside the socket. "
Connect the replacement bulb towards socket. Insert the socket back to the case and turn it clockwise.
Push the case back into the place. Insert and tighten the Phillips anchoring screws. Close the Escape's freight door.
Resources:
Ford Escape & Mazda Tribute: 2001 thru 2011 - Includes Mercury Mariner (Haynes Manuals)
No comments:
Post a Comment